FUEL SYSTEM
Remove the PAIR check valve from the valve cover.
Check the reed valve for damage or fatigue.
Replace the PAIR check valve if the rubber seat is
cracked, deteriorated or damaged, or if there is
clearance between the reed and seat.
Install the PAIR check valve into the valve cover as
shown.
Install the valve cover and tighten the bolts
securely.
Install the plug maintenance lid (page 4-B).
PCV CONTROL SOLENOID VALVE/PCV
REED VALVE (After '05 model)
REMOVAL/INSTALLATION
Disconnect the air suction hoses.
6-24
REED VALVE
VALVE STOPPER
RUBBER SEAT