•
SERVICE I N FORMATION
•
•
GENERAL
This section covers m aintenance of the final reduction.
These services can be done with the engine installed in the frame.
When installing the drive s haft, be sure to use the special tool; position the special tool a g ainst the bearing inner race
and pull the drive shaft i nto the bearing.
SPECIFICATIONS
Final reduction oil capacity (at disassembly)
Recommended final reduction oil
TORQUE VALUES
Final reduction oil check bolt
TOOLS
Bearing remover weight
07741-0010201
or 07936-371020A
or 07936-3710200 (U.S.A. only)
Pilot, 12 mm
07746-0040200
ITEM
1 3 N·m (1.3 kgf·m, 9 lbf·ft)
Attachment, 32 x 35 mm
07746-0010100
Pilot, 17 mm
07746-0040400
FINAL REDUCTION
SPECIFICATIONS
0.1 l iter (0.11 US qt, 0.09 1mp qt)
Hypoid gear oil #90
Attachment, 37 x 40 mm
07746-0010200
Driver
07749-0010000
1 1 -3