Honda 2003 NPS50 Ruckus Service Manual page 178

FINAL REDUCTION
Install the clamp, bolts and tighten them i n a criss­
cross pattern in two or three steps.
Install the air cleaner housing and tighten the bolt
securely.
Install the engine breather drain hose into the
clamp.
Install the brake cable through the cable holder.
Install the following:
- Rear brake (page 1 5-6)
- Rear wheel (page 1 5-4)
- Clutch/driven pulley (page 1 0-18)
Fill the final reduction with the recommended final
reduction oil (page 1 1 -5).
1 1 - 1 2