Rear Wheel Inspection; Rear Wheel Removal; Rear Brake Inspection - Honda 2003 NPS50 Ruckus Service Manual

REAR WHEEL/BRAKE/SUSPENSION
R EAR WHEEL
INSPECTION
Check the wheel rim runout using dial i ndicators.
Actual runout is 1 /2 the total indicator readings.
SERVICE liMITS:
Radial: 2.0 mm (0.08 in)
Axial:
REMOVAL
Place the scooter on its center stand.
Remove the muffler (page 3-9).
Remove the rear axle nut, washer and rear wheel.
INSTALLATION
Install the rear wheel onto the final gear shaft, align­
ing the spline.
Install the washer onto the final gear shaft.
Apply oil to the threads and seating surface of the
rear axle nut.
Tighten the rear axle nut to the specified torque.
TORQUE: 118 N·m {12.0 l<gf·m, 87 lbf·ft)
Install the muffler (page 3-9).
REAR BRAKE
Remove the rear wheel (page 1 5-4).
INSPECTION
Measure the rear brake drum I. D.
SERVICE liMIT: 95.5 mm (3.76 in)
Measure the brake lining thickness.
SERVICE liMIT: 1.0 mm (0.04 in)
1 5-4
2.0 mm (0.08 in)