Honda 2003 NPS50 Ruckus Service Manual page 221

SO
Install a new lower bearing outer race using the spe­
cial tools as shown.
TOOLS:
Stem race installer, 29 X mm 07XMF-GEE0200
Installer shaft
Install a new upper bearing outer race using the
special tools as shown.
TOOLS: SO
Stem race installer, 26 X 47 mm 07XMF-GEE0100
Stem race installer, 29 X
Installer shaft
Install the steering stem lock nut onto the steering
stem to prevent the threads from being damaged
when removing the bottom cone race from the
steering stem.
Remove the lower bearing inner race with a chisel
or equivalent tool, being careful not to damage the
steering stem.
Apply grease to a new lower bearing inner race and
press it to the steering stem using the special tool.
TOOL:
Fork seal driver, 27 mm
FRONT WHEEL/BRAKE/SUSPENSION/STEERING
(two required)
not available in
U.S.A.
07VMF-KZ30200
not available in
U.S.A.
mm 07XMF-GEE0200
not available in
U.S.A.
07VMF-KZ30200
BOTIOM CONE RACE
07947-1180001
FORK SEAL
1 4-25