Bearing Replacement - Honda 2003 NPS50 Ruckus Service Manual

FRONT WHEEL/BRAKE/SUSPENSION/STEERING
Remove the steering stem lock nut using the special
tool.
TOOL:
Socket wrench, 32 mm
Remove the lock washer.
Loosen the top cone race using the special tool.
TOOL:
lock nut wrench, 45 X 54 mm
Hold the steering stem and remove the steering top
cone race.
Remove the upper bearing.
Remove the steering stem and lower bearing.

BEARING REPLACEMENT

Always replace the Remove the upper/lower bearing outer races using
bearings and races the special tools.
as a set
TOOlS:
Not available in U.S.A.
Adjustable bearing remover set 07JAC-PHBOOOO
-Remover head
-Remover shaft
-Remover weight
U.S.A. only
Adjustable bearing puller,
25 - 40 mm
Slide hammer, 3/8 X 16
1 4-24
07916-KM10000
07SMA-GBC0100
07JAC-PH80100
07JAC-PH80200
07741-0010201
07736-A010008 or
07736-A01000A
Commercially
available