FUEL SYSTEM
REMOVAL/INSTALLATION
(After '05 model)
Refer to page 4-5
for air cleaner Remove the floor step (page 3-7).
element
Remove the rear fender bolt.
replacement.
Disconnect the engine breather, air suction and vac
uum piston hoses from the air cleaner housing.
Release the engine breather drain hose from the
clamp.
Remove the air cleaner housing mounting bolts.
Loosen the connecting hose band screw and dis
connect the connecting hose from the carburetor.
Disconnect the open air and air supply hoses.
Remove the air cleaner housing assembly.
Route the hoses Installation is in the reverse order of removal.
properly.
6-6