Float Chamber - Honda 2003 NPS50 Ruckus Service Manual

FUEL SYSTEM
Be careful nat to Turn the needle holder counterclockwise while
damage the pressing it in and remove it from the vacuum pis­
diaphragm. ton.
Remove the spring and jet needle from the vacuum
piston.
Air can leak out of Check the following:
the vacuum
Jet needle for stepped wear
chamber if the
- Vacuum piston for wear or damage
diaphragm is
- Diaphragm for pin holes, deterioration or dam-
damaged in any
age
way, even if only a
pin hole.

FLOAT CHAMBER

Remove the screws, float chamber and 0-ring.
Remove the float pin, float and float valve.
Check the float for damage or fuel in the float.
6-1 0
NEEDLE HOLDER
DIAPHRAGMNAC U U M PISTON
JET NEEDLE
DIAPHRAGM
NEEDLE HOLDER
FLOAT CHAMBER
FLOAT VALVE
SPRING
/
T PIN