NOTE:
•
•
DISASSEMBLY
Always replace the brake shoes as a set.
Mark all parts during disassembly so they can be
placed back in the original locations.
Loosen the rear brake adjusting nut.
Remove the brake shoes and springs by spreading
the brake shoes.
Remove the adjusting nut and brake cable from the
joint pin.
Remove the joint pin and return spring.
Remove the brake arm bolt.
Remove the brake arm while pulling the brake cam
out.
Remove the wear indicator plate and felt seal.
Remove the brake cam from the brake panel.
REAR WHEEL/BRAKE/SUSPENSION
NUT
1 5-5