FRONT WHEEL/BRAKE/SUSPENSION/STEERING
Install the rebound spring and guide bushing to the
fork tube.
Install the fork tube into the bottom case.
Press the fork tube into the bottom case u ntil the
snap ring groove is visible.
Install the snap ring into the groove in the bottom
case.
Fill up the bottom case inside with grease 1 .5
gram.
Coat a new dust seal lip with grease and install it
into the bottom case.
Install the fork cap.
INSTALLATION
Route the cables Install the set plate and cable guide when they are
removed.
properly.
Install the fork into the steering stem and align the
groove of the fork tube with the upper bolt hole of
the stem, then install the upper pinch bolt.
Tighten the fork pinch bolts securely.
Install the front wheel I page 14·10).
1 4- 1 8
REBOUND
SNAP RING
2
-
�
G U IDE BUSHING
FORK TUBE
-�
DUST SEAL