Floor Step Removal; Floor Step Installation - Honda 2003 NPS50 Ruckus Service Manual

FLOOR STEP
REMOVAL
Remove the following:
- Seat rail (page 3-5).
- Inner cover (page 3-5).
Remove the front mud guard.
Remove the four screws, eight bolts/washers and floor step.
SCREWS
INSTALLATION
Be careful not to Install the floor step onto the frame.
damage the wires, Install and tighten the eight bolts/washers and four
cables and hoses. screws.
Install the mud guard by aligning its tabs with the
Be careful not to
floor step slots as shown.
deform the mud
guard.
Install the following:
- Inner cover( page 3-5).
- Seat rail (page 3-5).
FRAME/BODY PANELS/EXHAUST SYSTEM
FRONT MUD GUARD
BOLTS/WASH ERS
SLOT
3-7