Rear Wheel Assembly - Honda 2003 NPS50 Ruckus Service Manual

REAR WHEEL/BRAKE/SUSPENSION
ASSEMBLY
BRAKE ARM BOLT
Apply grease to the brake cam sliding su rface.
Install the brake cam into the brake panel.
Apply oil to the felt seal and install it onto the brake
cam.
Install the wear indicator plate onto the brake cam
by aligning its wide tooth with the wide groove of
the brake cam.
Install the brake arm by aligning the punch marks
on the brake arm and brake cam.
Install a new brake arm bolt and tighten it to the
specified torque.
TORQUE: 4.9 N·m (0.5 kgf·m, 3.6 lbf·ft)
1 5-6
FELT SEAL
JOINT PIN
BRAKE SHOES
CAM
BRAKE ARM