Honda 2003 NPS50 Ruckus Service Manual page 184

ALTERNATOR/STARTER
Clean any oil from the tapered portion of the fly­
wheei i.D.
Install the flywheel onto the crankshaft, aligning the
key way with the woodruff key.
NOTICE
Before installing the flywheel, check that no nuts or
bolts are magnetically attached to the flywheel.
Install the washer and flywheel nut.
Hold the flywheel with the special tool and tighten
the flywheel nut to the specified torque.
TOOL:
Universal holder
TORQUE:
Install the cooling fan and tighten the bolts to the
specified torque.
TORQUE: 7.8 N-m (0.8 kgf·m, 5.8 lbf·ft)
Install the following:
- Radiator (page 7-13)
- Floor step (page 3-7)
1 2-6
44
07725-0030000
N-m (4.5 kgf-m, 33 lbf·ft)