Setting Videophone Hands-Free; Setting Image Quality For Videophone Calls; Changing Image Displays For Videophone Calls - Panasonic Foma p705im Instruction Manual

< Hands-free with Videophone

Setting Videophone Hands-free

You can set whether to switch to Hands-free automatically for when a
videophone call starts.
m1Settings1Videophone1Hands-free w/ V. phone
1
1ON or OFF
≥ See page 62 for the operation while Hands-free is activated and how to
switch to Hands-free.
< >
Visual Preference
Setting Image Quality for Videophone
Calls
You can set the quality of both the receiving image and sending image
on the display.
You can set the quality of receiving images only.
m1Settings1Videophone1Visual preference
1
1Select an image quality.
≥ "Prefer motion spd" is effective for moving images. When there is little motion,
the quality becomes better if you set to "Prefer img qual".
≥ If you operate from the Function menu during a videophone call, the setting is
effective only for the current videophone call.
Information
≥ If the radio wave conditions weaken during a videophone call, the image may
appear like a mosaic.
76
> < Select Image >
Changing Image Displays for
Videophone Calls
You can set an image to be sent to the other party.
1 m1Settings1Videophone1Select image
1Select an item.
On hold . . . . Sets an image for during answer-hold (On hold).
Holding . . . . Sets an image for while a call is on hold (Holding).
Substitute image
. . . . . . . . . . . Sets a substitute image (still image or Chara-den) for when the
camera is off.
Record message
. . . . . . . . . . . Sets an image while recording a record message.
Preparing . . . Sets an image for while playing back an answer message.
Movie memo
. . . . . . . . . . . Sets an image for while recording a movie memo.
2
Select an image.
Pre-installed . . . For sending a pre-installed still image to the other party.
Original . . . . . . . For sending an appropriate message with a still image stored
using "Set display".
Chara-den . . . . . For sending a Chara-den image selected by "Substitute
image". (See page 73)
(Displayed only when "Substitute image" has been selected
in step 1.)
≥ Press l(
) to play back a demo to check the still image or Chara-den
image.
≥ To change the setting of "Original" or "Chara-den", press i(
"Change setting", then select a still image or Chara-den image. If you have
selected "Original", select a still image after selecting a folder. See "Set
display" for settable still images.
Information
≥ Even if you delete the still image selected from "Original", that still image is
displayed to the other party. To change, set by "Change setting" or "Set display".
), select