Panasonic Foma p705im Instruction Manual page 543

AT command
AT+CGREG=n Sets whether the network
registration state is notified.
Displays whether you are inside
or outside the service area
according to the returned
notification.
[M]
[&F][&W]
AT+CGSN Displays the serial number of the
FOMA phone.
[M]
AT+CLIP=n Enables to display the other
party's caller ID on the personal
computer at reception of 64K
data communication or
videophone calls.
[AT][M]
[&F][&W]
AT+CLIR=n Sets whether to notify your
phone number to do 64K data
communication or to make
videophone calls.
[M]
AT+CMEE=n Sets how the FOMA phone
shows an error report.
[M]
[&F][&W]
AT+CNUM Displays the own phone number
of the FOMA phone.
[AT][M]
Outline
n=0: Not notified. (default)
n=1: Notified at switching between the inside and
outside of the service area.
(Inquiry)
AT+CGREG?
+CGREG: <n>,<stat>
n: Set value
stat:
0: Outside packet area
1: Inside packet area
4: Unknown
5: Inside packet area (during roaming)
n=0: Does not notify. (default)
n=1: Notifies.
Result: +CLIP:<n>,<m>
m=0: NW setting not to notify caller ID at calling
m=1: NW setting to notify caller ID at calling
m=2: Unknown
n=0: Notifies (does not notify) caller ID according to
CLIR service.
n=1: Does not notify the other party of your caller ID.
n=2: Notifies the other party of your caller ID. (default)
Result: +CLIR: <n>,<m>
m=0: CLIR is not launched. (always notify)
m=1: CLIR is launched. (always not notify)
m=2: Unknown
m=3: CLIR temporary mode (not notify, default)
m=4: CLIR temporary mode (notify, default)
n=0: Uses the ordinary ERROR result. (default)
n=1: +CME ERROR: Uses the <err> result code. <err>
indicates a numeric value.
n=2: +CME ERROR: Uses the <err> result code. <err>
indicates characters.
AT+CMEE?: Displays the current setting.
Command execution examples on the right are for when
the FOMA phone or connection has abnormality.
Below listed are the +CME ERROR result codes.
1: no connection to phone
10: SIM not inserted
15: SIM wrong
16: incorrect password
100: unknown
number: Phone number (In B Mode of 2in1, Number B
is displayed.)
type: 129 or 145
129: Does not include the IDD prefix code (+).
145: Includes the IDD prefix code (+).
Result: +CNUM:,<number>,<type>
50
Parameter/Explanation
Command execution
example
AT+CGREG=1
OK
(set to "Notified")
AT+CGREG?
+CGREG:1,0
OK
(means the outside of the service
area)
(when moved from the outside to
the inside of the service area)
+CGREG: 1
AT+CGSN
123456789012345
OK
AT+CLIP=0
OK
AT+CLIP?
+CLIP:0,1
OK
AT+CLIR=0
OK
AT+CLIR?
+CLIR:0,1
OK
AT+CLIR=?
+CLIR:(0-2)
OK
AT+CMEE=0
OK
AT+CNUM
ERROR
AT+CMEE=1
OK
AT+CNUM
+CME ERROR: 10
AT+CMEE=2
OK
AT+CNUM
+CME ERROR: SIM
not inserted
AT+CNUM
+CNUM:,"+8190123
45678",145
OK