Making Dial-Up Connection - Panasonic Foma p705im Instruction Manual

21
Click the "
carry out respective settings.
In the "
dial-up server)" field, select "PPP: Windows 95/98/NT4/2000,
Internet".
For the component, check only "
IP) [Internet protocol (TCP/IP)]".
Then click " (Setting)".
22
Uncheck all the items, then click "OK".
23
Return to the display in step 21, then click
"OK".

Making Dial-up Connection

The operation below explains how to make a dial-up
connection using Windows XP as an example. Perform
the operation on page 4 to connect the FOMA phone to
your personal computer.
≥To perform a connection via packet communication, it is
recommended that you optimize the communication performance by
"Communication Setup Optimization" on page 18. By optimizing
data, you can maximize the high-speed communication capability in
the FOMA network. To execute the optimization, install "FOMA PC
setup software" (see page 8).
≥When you perform 64K data communication, do not optimize the
communication performance by "Communication setup optimization".
1
" (Start)"1"
programs)"1"
1"
(Communications)"1Open "
(Network connection)".
(Network)" tab, then
(Type of calling
(TCP/
(All
(Accessories)"
28
2
Open the access point to be used.
Select the access point icon of the ISP name (see page 24) you
specified in "Set Dial-up Network", then "
(Network task)" "
Otherwise, double-click the access point icon.
3
Confirm the contents and click "
≥When connecting to "mopera U" or "mopera", you can leave the
user name and password fields blank.
4
The display appears to indicate the
connecting state.
In this period, the system performs logon processing to confirm the
user name and password.
5
The connection is completed.
After the connection is completed, the message below appears from
the indicator of the task bar for a few seconds.
≥You can start the browser software to browse web pages, use
e-mail and so on.
≥If this message does not appear, confirm the setting of the access
point again.
Information
≥Use the FOMA phone with the dial-up setting completed for dial-up
connection. To connect another FOMA phone, you may need to
reinstall the FOMA communication setup files (driver).
≥The power consumption of the FOMA phone increases during
communication.
≥During packet communication, the communication state appears on the
FOMA phone.
" " (Communicating, data sending)
" " (Communicating, data receiving)
" " (Communicating, no data sending/receiving)
" " (Outgoing or being disconnected)
" " (Incoming or being disconnected)
≥During 64K data communication, "
(Start this connection)".
(Dial)".
" appears on the FOMA phone.