Panasonic Foma p705im Instruction Manual page 185

Press l(
6
).
The animation display during transmission appears and the mail message is
sent.
≥ To cancel sending midway, press
least one second). However, the mail message might be sent depending on
the timing.
7
OK
Information
≥ Depending on the radio wave conditions, the characters might not be displayed
correctly at the destination.
≥ If you send an i-mode mail message to other carrier's mobile phone (au/SoftBank/
Tu-Ka) with a pictograph entered, the pictograph is automatically converted into a
similar pictograph at the receiving end. Depending on the model or function of the
receiving end's mobile phone, however, the pictograph might not be correctly
displayed or be converted into a character or "=" when no corresponding
pictograph is found.
≥ When the number of sent mail messages exceeds the FOMA phone's storage
maximum, they will be overwritten from the oldest one. However, protected sent
mail messages cannot be overwritten.
≥ You cannot compose an i-mode mail message when the number of sent mail
messages in the Outbox has reached the maximum and those messages are all
protected, or when 20 mail messages are saved to the Draft or the Draft is full.
Release the protection for sent mail messages, or send/delete draft mail
messages, and then operate again.
≥ When you select "Compose message" from the Function menu such as when
entering a phone number, the mail address is entered as a destination address if
the phone number and mail address are stored in a Phonebook entry. When
multiple mail addresses are stored in the Phonebook entry, the first mail address
is entered.
≥ If you try to send the mail whose address is a phone number headed by "184"/
"186", the confirmation display appears asking whether to delete prefix numbers
and send the mail.
≥ When a destination phone number or mail address is stored in the Phonebook,
the name stored in the Phonebook is displayed in the address field.
≥ You cannot send mail to the addresses that include a comma (,).
≥ You can enter an address in the To, Cc and Bcc fields.
o ( O ) or press and hold r (for at
Information
≥ If the destination address has been stored in the Phonebook with a secret code,
the secret code will be added automatically at sending. However, even if a secret
code is stored in the Phonebook, the secret code will not be added and the mail
will be sent as ordinary i-mode mail unless the address is a phone number or
"phone number@docomo.ne.jp".
≥ If you store the secret code and send mail to a mail address other than that of
DoCoMo mobile phones, you might not receive the error message for unknown
address.
≥ The recipients might not be able to receive the full length of the subject depending
on their phones.
≥ You can send up to 2,000 full-pitch characters in text to the i-mode phone of the
mova service.
≥ Each line feed is counted as one full-pitch character, and a space is counted as
one full-pitch or half-pitch character.
≥ The mail message you entered a Decomail-pictograph becomes a Deco-mail
message.
≥ In B Mode of 2in1, you cannot compose i-mode mail.
Function Menu of the Message Composition Display
Function menu
Send You can send the mail message.
Go to step 7 on page 183.
Preview Check the address, subject, text and attachments before
sending.
≥ You can send the mail message by pressing l(
Save When composing or editing the mail, you can save it to the
Draft.
Operation/Explanation
).
183