Panasonic Foma p705im Instruction Manual page 384

m1Service1Nuis. call blocking
1
1Do the following operations.
Item
Register caller You can register the phone number of the call that arrived last
for rejection.
1YES1OK
Register selected You can register the specified phone number for rejection so
No. that the call from that phone number does not come in.
1Enter a phone number1YES
B o to select the phone number from the Search
≥ Press
Phonebook display, and press
Call List, and press
Delete last entry You can delete the phone number registered last. Repeat the
same procedures to delete phone numbers one by one from
the one registered last.
1YES1OK
1YES1OK
Delete all entries
Check No. of You can check the number of phone numbers registered for
entries rejection.
382
Operation/Explanation
o to select from the Dialed V
o to select from the Received Call List. C
< Caller ID Request >
Using Caller ID Display Request Service
This service provides the guidance asking the caller ID notification
against incoming voice calls/videophone calls without caller IDs, and
then automatically disconnects the call.
≥ The call rejected by Caller ID Display Request Service is not stored in "Received
calls", and the "Missed call" desktop icon does not appear.
Relation between each Service and incoming calls while Caller ID Display
Request Service is activated
Handling incoming call from the caller who does not
Service
notify a caller ID
Voice Mail Service Caller ID Request guidance is played back.
(Message is not held.)
Call Forwarding Caller ID Request guidance is played back.
Service (Not forwarded to the forwarding destination.)
Call Waiting Service Caller ID Request guidance is played back.
Nuisance Call For the call from the number registered to be rejected, the
Blocking Service Call Rejection guidance is played back.
Public Mode Caller ID Request guidance is played back. [Public Mode
(Drive Mode) (Drive Mode) guidance is not played back.]
m1Service1Caller ID request
1
1Do the following operations.
Item
1YES1OK
Activate
1YES1OK
Deactivate
Check setting You can check the setting contents of Caller ID Display
Request Service.
Information
≥ If you activate this service while you set "Call setting w/o ID" to "Reject", this
service has priority.
≥ You can set and confirm this setting from the FOMA phone with your own UIM
inserted. You cannot remote-control the setting from landline phones, public
phones, and other mobile phones.
Operation/Explanation