Panasonic Foma p705im Instruction Manual page 514

For Windows 2000
1
" (Start)"1"
"
2
Open "
modem options)" in "
(Control panel)".
3
If the " (Address information)"
display appears, enter "
then click "OK".
4
Open the " (Modem)" tab, confirm the
COM port number in the "
point)" field of "FOMA P705i " or
"PROSOLID ", then click "OK".
≥The COM port number you confirmed is used to set an access
point name (APN) (see page 21).
≥The contents on the property display and COM port number vary
depending on the personal computer you use.
(Setting)"1Open
(Control panel)".
(Phone and
(City code)",
(Access
Set an Access Point Name (APN)
The operation below explains how to set an access
point name (APN) for packet communication. You can
register up to 10 access point names (APNs), which are
managed with cid1 to cid10 (see page 22).
When using "mopera U" or "mopera", you do not need
to set the access point name (APN).
The operation below is the example where you use
"XXX.abc" as the access point name (APN) and use the
FOMA USB Cable with Charge Function 01 (option). For
the actual access point name (APN), contact your
Internet service provider or network administrator.
The setting here will be the access point number for
dial-up network setting (see page 23).
For Windows XP
1
Connect the FOMA USB Cable with Charge
Function 01 to the FOMA phone.
2
Turn on the power to the FOMA phone, then
connect the FOMA USB Cable with Charge
Function 01, which is already connected to
the FOMA phone, to the personal computer.
3
Start Hyper Terminal.
" (Start)" "
(Accessories)" "
(Hyper Terminal)".
After starting Hyper Terminal, when the message "
displayed, set as desired. Contact the maker of your personal
computer and Microsoft Corporation for the setting contents.
≥For Windows 2000, "
" (Accessories)" "
4
Enter any name in the "
then click "OK".
Here, "Sample" is entered as an example.
21
(All programs)" "
(Communications)" Open "
(Select the specified Telnet program?)" is
(Start)" " (Programs)"
(Communications)" Open "
(Hyper Terminal)".
(Name)" field,
Telnet