Panasonic Foma p705im Instruction Manual page 499

7
Turn on the power to the FOMA phone, then
connect the FOMA USB Cable with Charge
Function 01, which is already connected to
the FOMA phone, to the personal computer.
Installation starts.
Pop-up message "
hardware was found)" appears for a few seconds from the indicator
of the task bar.
After you complete the installation, pop-up message "
hardware is installed, and the system is ready.)" appears for a few
seconds from the indicator of the task bar.
When the installation does not start automatically, and the
pop-up message "
(The wizard for finding new hardware starts)" appears
Install by following steps.
1. Select "
now)" and click " (Next)".
(The display may not appear depending on the personal
computer you use.)
2. Select "
[Install from the list or a specific place (details)]", then click "
(Next)".
3. Select "
place below for the appropriate driver)", and uncheck "
the removable media (floppy disk, CD-ROM, etc.)]". Then
check "
4. Click " (Browse)", specify "<CD-ROM drive name>
USB_Driver P705i Drivers Win2k_XP" or "<CD-ROM drive
name> USB_Driver PROSOLID Drivers Win2k_XP",
then click " (Next)".
(The CD-ROM drive name varies depending on the personal
computer you use.)
5. Click " (Complete)".
8
Click "
(recommended)]".
Then install the FOMA byte counter.
Install by following the onscreen instructions.
≥When you do not install the FOMA byte counter, go to step 9.
9
Click " (Complete)".
Next, confirm that the "FOMA communication setup files" (driver) are
installed correctly. (See page 7)
For Windows 2000
1
Connect the FOMA phone and the FOMA USB
Cable with Charge Function 01. (See page 4)
2
Start Windows, then set the provided "FOMA
P705i /PROSOLID
personal computer.
(New
(New
(No, do not connect
(Search the
[Search
(Include the place below)".
[Installing
CD-ROM" into the
3
Click "
(Data link software/Setup software)".
≥If this display appears during installation of the "FOMA
communication setup files" (driver), close the display.
4
Click "
communication setup files (USB driver)]".
5
Double click "FOMAinst.exe" in opened
folder.
6
Read "
licensing contract)", and click "
(Agree)".
6
(Install)" under "
[FOMA
(Software