Panasonic Foma p705im Instruction Manual page 280

Information
≥ If you change the size of a still image, some still images cannot be allowed to edit
picture.
≥ If the battery runs out during editing, the edited contents are discarded.
≥ The file name, title, storage location, and acquired source of the newly saved still
image are as follows:
File name: "YYYYMMDDhhmmnnnn"
Title: "YYYY/MM/DD hh:mm"
(Y: year, M: month, D: date, h: hour, m: minute, n: number)
Storage location: Folder the source file is saved to (Still images on the microSD
memory card are saved to the "i-mode" folder.)
Acquired source: The same as the source file
Function Menu of the Edit Picture Display
Function menu
Marker stamp You can add the marker stamp in the "Stamp" folder.
1Select a marker stamp.
≥ You can rotate the marker stamp by pressing i(
and selecting "90° to right/90° to left/180°". Select "Scale up/
Scale down" to enlarge or shrink the marker stamp.
≥ You can reselect a marker stamp by pressing l(
M o to position the marker stamp and press
1Use
≥ You can add a marker stamp by pressing l(
o (
1O
)
Frame 1Select a
frame1O
≥ You can add the frame whose size is the same as the size of
the image you are editing.
≥ You can display the previous or next frame by pressing
Press and hold
sequentially.
≥ You can rotate the frame by pressing i(
selecting "180° rotation".
≥ You can reselect a frame by pressing l(
278
Operation/Explanation
o ( O
o (
)
o for at least one second to display N
) and
).
Function menu
Character stamp You can add text.
1Enter characters.
You can enter up to 15 full-pitch/30 half-pitch characters.
However, the number of characters you can enter decreases
depending on the size of the still image.
≥ Press i(
color; then, you can change the color of characters. You can
switch between "16 Color" and "256 Color" by pressing
c(
Select "Font" to change the character fonts.
Select "Character size" to enlarge or shrink characters.
Select "Character input" to edit entered characters.
1Use
1O o (
≥ You can reselect a position by pressing l(
Cushy mark You can compound a cushy mark in the "Stamp" folder. The
)
person's facial region is automatically recognized and the
cushy mark is pasted to an appropriate position.
1Select a cushy mark.
).
≥ Press i(
).
enlarge or shrink the cushy mark.
).
≥ To cancel, press l(
1Use
≥ The cushy mark that comes out of the still image is cut off.
≥ You can add a cushy mark by pressing l(
o (
1O
o . N
1Select an image size to change to.
Change size
≥ If you select the size different in proportional ratio from the
source still image, the still image is enlarged or shrunk so
that it does not exceed the selected size with its proportional
ratio retained.
o (
1O
≥ You can reselect a size by pressing l(
Operation/Explanation
) and select "Character color" to select a
).
o to position the characters and press M
)
) and select "Scale up/Scale down" to
).
o to position the cushy mark and press M
)
)
o ( O
)
).
o ( O
).
).
).