Panasonic Foma p705im Instruction Manual page 507

9
Specify "
(Password)", then click "
When specifying the user name and password, correctly enter the
information supplied from your Internet service provider, taking care
of uppercase and lowercase letters and so on.
≥Select a user optionally.
10
Put a check mark for "
(Optimize)", then click "
≥If optimized already, the confirmation display to optimize does not
appear.
11
Confirm the set information, then click "
(Complete)".
The set contents are listed on the display. Confirm that there is no
problem on the set contents, then click "
≥To change the set contents, click "
≥If "
(Create a dial-up shortcut on the desktop)" is checked, a dial-up
shortcut will be created on the desktop.
12
Click "OK".
The setting is completed.
Open the dial-up shortcut icon automatically created
on the desktop; then the connection display for
starting communications appears. After confirming that the
connection starts, you can start the Internet browser or mail browser
for communication. (See page 16)
≥To make the optimization valid, you need to restart the personal
computer.
(User name)" and "
(Next)".
(Next)".
(Complete)".
(Back)".
Select 64K Data Communication from
"
Using "mopera U" or "mopera" as an access point
The 64K data communication is a communication
system you are charged according to the duration of
connection. (Maximum communication speed: 64 kbps)
You can use the DoCoMo Internet access service,
"mopera U"/"mopera".
1
Click "
2
Select "64K
communication)", then click "
Confirm that "64K
checked, then click "
3
Select " mopera U
mopera U)" or " mopera
to mopera)", then click "
To use "mopera U", select " mopera U
mopera U)". To use "mopera", select " mopera
to mopera)".
When " mopera U
the confirmation display appears asking whether you have signed up
for it. If you have signed up, click "
≥See page 15 for using a provider other than "mopera U" or
"mopera".
4
Enter an access point name, then click "
(Next)".
You can specify any name for the currently created connection.
Enter a plain name in the "
Confirm that "FOMA P705i " or "PROSOLID
" (Select a modem)" field.
≥You cannot enter the following half-pitch characters:
¥, /, :, ¢, ?, !, <, >, |, and ".
≥Set whether to notify your caller ID for dial-up connection. You
need to notify your caller ID for connecting to "mopera U" or
"mopera".
5
Click " (Next)".
If the access point is "mopera U" or "mopera", you can connect even
if the " (user name)" and "
blank.
≥Select a user optionally.
14
(Easy Setting)"
(Easy Setting)".
(64K data
(Next)".
(64K data communication)" is
(Next)".
(Connect to
(Connect
(Next)".
(Connect to
(Connect to mopera U)" is selected,
(YES)".
(Access point name)" field.
" is displayed in the
(password)" fields are
(Connect