Panasonic Foma p705im Instruction Manual page 344

< Multiaccess >
Multiaccess
Multiaccess enables you to simultaneously connect to three lines; a
voice call, packet communication, and SMS.
To switch the displays, press and hold x for at least one second;
or press x to switch from TASK MENU. (See page 343)
See page 437 for details on combination of Multiaccess.
Voice call
i-mode, i-αppli, i-mode mail, packet communication via PC
SMS
Information
≥ You are charged a fee for each line during Multiaccess.
Make a Voice Call during i-mode or during Packet
Communication
You can make a voice call without disconnecting i-mode or packet
communication.
1
During i-mode or packet communication1x
1Stand-by display
The Stand-by display appears.
2
Make a call.
≥ If you make a videophone call during i-mode, i-mode is disconnected and the
videophone call is made.
After you finish the videophone call, the i-mode display returns.
342
Receive a Voice Call during i-mode or during Packet
Communication
You can receive a voice call without disconnecting i-mode or packet
communication.
1
The Call Receiving display appears when a call comes in
1Press d to answer the call.
≥ To return to the display for i-mode or packet communication without
Single line
answering the call, press and hold x for at least one second. Press and
Single line hold x for at least one second again to return to the Call Receiving
Single line display.
The other party hears not a message but a calling tone.
Use Communication during Voice Call
You can use i-mode, send/receive i-mode mail, etc. without
disconnecting a voice call.
1
During a voice call1x1m(
Select an icon to operate each function.
Information
≥ When a mail message or Message R/F comes in during a call, the ring tone does
not sound and illumination does not flicker regardless of the "Receiving display"
setting.
≥ A ring tone sounds and the Receiving Result display appears when "Receiving
display" is set to "Alarm preferred" except for the following cases:
During a call
When an i-αppli program set for the Stand-by display is running as an ordinary
i-αppli program
≥ When you perform packet communication via a personal computer, make a
call-out operation from the personal computer during a voice call.
)
While the camera is activated