Protecting Foma Phone From Data Causing Failure; Scanning Function - Panasonic Foma p705im Instruction Manual

< >

Scanning Function

Protecting FOMA Phone from Data
Causing Failure
First of all, update the pattern data to make it the latest.
Regarding data and programs downloaded or obtained from sites,
i-mode mail messages or SMS messages to the FOMA phone, you can
detect data that might cause failure, can delete it, and can stop
starting an application program.
≥ Use the pattern data for checking. Update the pattern data, because it is upgraded
each time new trouble is found. (See page 460)
≥ The scan function is for filtering out the data that causes failure to mobile phones at
the time of browsing web pages or receiving mail messages. Note that this function
works only when the pattern data for each failure has been downloaded to your
mobile phone and when the pattern data for each failure is found.
≥ The data contained in the pattern data varies depending on the mobile phone
model. Therefore, note that we may stop distributing the pattern data to mobile
phones that have been on the market for three years or more.
Set Scanning Function <Set Scan>
If you set "Scan" to "Valid", data or a program can be automatically
checked when you try to run it.
In addition, if you set "Message scan" to "Valid", a received SMS
message can be automatically checked when you display it.
m1Settings1Lock/Security1Scanning function
1
1Set scan1Select an item.
Scan . . . . . . . . . . . . Sets whether to run the scanning function.
Message scan . . . . Sets whether to run the scanning function when
displaying an SMS message.
≥ While "Scan" is set to "Invalid", you cannot set "Message scan".
460
2
Valid or Invalid1YES
≥ When the scan function is set, an alert is shown by five levels if data that
might cause failure is detected. (See page 461)
Information
≥ The scanning is not available for the SMS message which notifies you of
receiving mopera mail or of incoming calls for Voice Mail Service.
Update Pattern Data <Update>
m1Settings1Lock/Security1Scanning function
1
1Update1YES1YES
≥ To cancel during i-mode connection, select "Cancel".
2
OK
≥ When pattern data update is not necessary, "Pattern
definitions are up-to-date" is displayed. Use the
pattern data as it is.
Information
≥ When updating the pattern data, the proper information about your FOMA phone
(model name, serial number, etc.) is automatically sent to the server (DoCoMo-
managed server for the scanning function). We at DoCoMo never use the sent
information for other purposes than for the scanning function.
≥ Set the date (year/month/date) for the FOMA phone correctly in advance.
≥ The pattern data is not updated in the following cases:
When the date/time is not set
When the UIM is not inserted
While another function is working
When connecting to external devices such as personal computers
While Self Mode is activated
≥ If you cancel downloading midway, the data downloaded up to that point is deleted.
During a call Out of the service area
During Lock All