Panasonic Foma p705im Instruction Manual page 123

PIN1 Code/PIN2 Code
For the UIM, you can set the two security codes, namely the PIN1 code
and PIN2 code.
These security codes are "0000" at the time of your contract, but you
can change them by yourself. (See page 122)
The PIN1 code is the four- to eight-digit number for checking the user
each time the UIM is inserted into the FOMA phone or each time the
FOMA phone is turned on, so that you can prevent the third party from
using your UIM. By entering your PIN1 code, you can make or answer
calls, or use functions in the FOMA phone.
The PIN2 code is the four- to eight-digit number for executing Reset
Total Cost, using the user certificate or applying for the issue of it, etc.
≥ If you purchase a new FOMA phone and use the existing UIM with the new FOMA
phone, use the PIN1 code and PIN2 code you have set previously.
When the PIN1 Code/PIN2 Code Entry display appears, enter your
four- to eight-digit PIN1 code/PIN2 code and press
≥ The entered PIN1 code/PIN2 code is displayed as "_".
≥ If you enter a wrong PIN1 code/PIN2 code three times in
succession, it is locked and the FOMA phone cannot be
used. (The remaining number of times you can enter
appears on the display.)
When you enter the correct PIN1 code/PIN2 code, the
remaining number of times you can enter will return to
three times.
PUK (PIN Unblock Code)
The PUK (PIN unblock code) is the eight-digit number for releasing the
PIN1 code and PIN2 code lock state. You cannot change this code by
yourself.
≥ If you enter a wrong PUK (PIN unblock code) 10 times in succession, the UIM is
locked.
Security when the power
Enter PIN1 code
O o (
).
Set new PIN code
<
Change Security Code
Changing Terminal Security Code
For PIN1 code
Change the default for the Terminal Security Code required for
operating functions to your own four- to eight-digit code so that you
can make full use of the FOMA phone. Make sure you take a note of
the security code you have changed just in case you forget it.
m1Settings1Lock/Security1Change security code
1
1Enter the current Terminal Security Code.
≥ If you enter the code for the first time, enter "0000".
2
Enter a new Terminal Security Code (four to eight
digits)1YES
Operation of user certificate
Connecting to FirstPass sites
turns on
Enter PIN2 code
Wrong entry 3 times in succession
Enter PUK (PIN unblock code)
Entry OK Wrong entry 10 times
in succession
Consult the handling
counter of a DoCoMo shop
>
m + 2 - 9 -
121