Panasonic Foma p705im Instruction Manual page 226

Function menu
Change member You can store members from a Mail group in the chat group.
1Mail group1Select a Mail group.
≥ If you have already stored members in the chat group, the
confirmation display appears asking whether to replace all
the members.
Member setting You can set the member's name and image. You can switch
members by pressing
1Select the member name field1Enter a member's name.
≥ You can enter up to four full-pitch/eight half-pitch characters.
≥ Not to change the member's name, go to the next step.
1Select the picture field1Select a folder
1Select an image.
1YES
Delete
1Enter your Terminal Security Code1YES
Delete all
< Compose SMS >
Composing SMS Messages to Send
You can compose and send SMS messages.
You can save up to 1,000 sent SMS messages including i-mode mail
messages to the Outbox.
≥ You can send and receive SMS messages to and from subscribers of overseas
carriers other than DoCoMo. For the countries and overseas carriers available for
the service, refer to the DoCoMo Global Service web page.
≥ You can move/copy the sent SMS messages to the UIM. (See page 361)
1 l1Compose SMS
224
Operation/Explanation
o . N
Address field
Text field
SMS Composition
display
2
Select the address field1Select an item.
Phonebook . . . . . . . . Call up a Phonebook entry and select a phone number.
Sent address . . . . . . . Select a phone number and press
Received address . . . Select a phone number and press
Enter address . . . . . . Enter a phone number.
Only one address can be specified.
≥ You can enter up to 21 digits (including "+").
≥ When the address is that of overseas carriers other than DoCoMo, enter "+"
(press and hold 0 for at least one second), "country code", and
"destination mobile phone number" in that order. When the mobile phone
number begins with "0", enter the phone number except for the "0". Also, you
can enter "010", "country code", and "destination mobile phone number" in
that order to send SMS messages. (When you reply to SMS messages
received from overseas, enter "010".)
3
Select the text field1Enter text.
≥ The number of characters you can enter differs depending on the "SMS input
character".
Press l(
4
).
The animation display during transmission appears and mail is sent.
5
OK
Information
≥ Depending on the radio wave conditions, the characters might not be sent
successfully to the destination.
≥ When the number of sent mail messages exceeds the maximum number of
storage, they will be overwritten starting from the oldest sent mail. However,
protected sent mail cannot be overwritten.
≥ You cannot compose an SMS message when the number of sent mail messages
in the Outbox has reached the maximum and those messages are all protected,
or when 20 mail messages are saved to the Draft or the Draft is full.
Release the protection for sent mail messages, or send/delete draft mail
messages, and then operate again.
≥ Even if "Activate" of "Caller ID notification" is set to "OFF", the caller ID is notified
to the other party you send an SMS message to. If you attempt to send an SMS
message to the phone number headed by "184"/"186", the confirmation display
appears asking whether to delete prefix numbers and send the mail.
o ( O
).
o ( O
).