Prefix Setting - Panasonic Foma p705im Instruction Manual

Country Code Setting
You can store up to 27 country codes to be added for making
international calls from overseas.
m1Settings1Network setting
1
1Int'l dial assist1Country Code set.
1Highlight <Not recorded> and press l(
≥ If you select a stored country name, you can check the stored contents.
2
Enter a country name 1Enter a country code.
≥ You can enter a country name of up to 8 full-pitch/16 half-pitch characters.
≥ You can enter a country code of up to 5 digits. But you cannot use #, :, and
+.
IDD Prefix Setting
You can store up to three international call access codes to be added
to the beginning of a phone number for making an international call.
1 m1Settings1Network setting
1Int'l dial assist1IDD prefix setting
1Highlight <Not recorded> and press l(
≥ If you select the stored item, you can check the stored contents.
2
Enter a name1Enter an international call access code.
≥ You can enter a name of up to 8 full-pitch/16 half-pitch characters.
≥ You can enter an international call access code of up to 16 digits.
Function Menu while Country Code Setting/IDD Prefix
Setting is Displayed
Function menu
Edit Go to step 2 of "Country Code Setting" on page 61 for Country
Code Setting, and go to step 2 of "IDD Prefix Setting" on
page 61 for IDD Prefix Setting.
).
≥ You can edit the item also by pressing l(
1YES
Delete this
1Enter your Terminal Security Code1YES
Delete all
Information
<Delete this> <Delete all>
≥ You cannot delete the country code or international call access code set by "Auto
assist setting".
< >

Prefix Setting

Storing Numbers to be Added to the
Beginning of a Phone Number
).
You can store prefix numbers such as international call access codes
or "186"/"184" and add them to the phone number for dialing. You can
store up to seven prefix numbers.
m1Settings1Network setting1Prefix setting
1
1Highlight <Not recorded> and press l(
≥ If you select a stored prefix, you can check the stored contents.
≥ To delete a stored prefix, press i(
"Delete all" then select "YES". If you select "Delete all", you need to enter your
Terminal Security Code.
2
Enter a name1Enter a prefix number.
≥ You can enter a name of up to 8 full-pitch/16 half-pitch characters.
≥ You can enter a prefix number of up to 16 digits. The keys for entry are limited
to 0 through 9, s and a.
Operation/Explanation
).
).
) and select "Delete this" or
61