Using Chara-Den - Panasonic Foma p705im Instruction Manual

Function menu
Erase all You can erase all record messages and a voice memo from
the Record Message List, and can erase all videophone record
messages and movie memos from the Videophone Record
Message List.
1YES

Using Chara-den

You can perform the setting for sending a Chara-den image to the
other party.
≥ See page 287 for Chara-den images.
Set by Call
You can set a Chara-den image to be sent to the other party for
making a videophone call.
1
Chara-den display/Chara-den List1l(
Enter the destination phone number and press l(
videophone call.
≥ When the other party's phone number is stored in the Phonebook, you can
retrieve it selecting from the Search Phonebook display by pressing
≥ You can search for the phone number also from Received Calls by pressing
C o or from Redial by pressing
Information
≥ The priority order of substitute images to be sent to the other party is as follows:
"Setting by call" "Setting for Phonebook entry"
Substitute Image
You can set a Chara-den image for "Substitute image" of "Select image".
1
Chara-den display/Chara-den List/Chara-den
Recording display1i(
≥ From the Chara-den List, you can set it also by pressing m(
Operation/Explanation
)
) to make a
o . V
"Group setting" "Select image".
)1Substitute image
Chara-den Setup
You can perform settings for a Chara-den call. These settings are
effective only for during a videophone call.
1
During a Chara-den call1i(
1Chara-den setup1Do the following operations.
Item
Switch Chara-den 1Select a Chara-den image.
≥ If you switch Chara-den images, the action mode switches to
Action list You can display the list for actions that you can operate.
≥ Highlight an action and press
≥ You can display the Action List also by pressing a.
Change action You can switch the action mode between Whole Action Mode
(
At videophone
≥ You can switch modes also by pressing l.
start-up
Whole Action
Mode
o . B
SW substitute img. You can switch a substitute image to be sent to the other party
to the still image set for "Pre-installed" of "Select image".
SW org. subst. You can switch a substitute image to be sent to the other party
img.
to the still image set for "Original" of "Select image".
).
)
Operation/Explanation
Whole Action Mode.
o ( O
action. Press l(
) to check the details of the action.
) and Parts Action Mode ( ).
) to execute the
73