Panasonic Foma p705im Instruction Manual page 245

Auto Start Time
You can set the date and time for automatic start. You can set for up to
three software programs.
1
Software List/IC Card List1i(
1Auto start time
2
Put a check mark for an item to be set1l(
Time interval set . . . Starts at an interval specified by the software program.
The setting is completed.
Start time set . . . . . . Starts at the set start time automatically.
3
Select start time1Enter the date and time to be set.
4
1 time1Select a type of repeat.
≥ If you select "1 time", the automatic start is not repeated.
≥ If you select "Weekly", put a check mark for days of the week to be set and
press l(
).
Press l(
5
).
Auto Start Info
You can check whether a software program has started automatically
and properly. Also, you can check the information of start failure from
IC card. Up to three records of automatic start, a record of automatic
start set by i-αppli, and a record of start failure from IC card are stored.
1 m1i-αppli1i-αppli info1Auto start info
StartO. . . . .Started automatically and properly.
StartX . . . . .Did not start automatically. When "
o ( O
press ) to start the software program.
Start– . . . . .Has not started yet.
Information
≥ Software programs do not start automatically in the following cases:
When the FOMA phone is turned off
When another function is working
During Personal Data Lock
)
When the time set for automatic start is identical to the reserved time set for
"Software update", or the time set for an alarm of "Alarm", "Schedule" or "ToDo"
When a start time has been specified to the same software program within 10
)
minutes from the previous auto-start
≥ If automatic start fails, "
the Auto Start Info.
< i-αppli Stand-by Display
Operating i-αppli Stand-by Display
Software Setting (Stand-by Set)
You can set an i-αppli program for the Stand-by display. Once set, the
i-αppli Stand-by display automatically appears each time you bring up
the Stand-by display.
1
Software List/IC Card List1i(
1Software setting1Stand-by set1ON or OFF
1l(
"
"
To operate an i-αppli program as a normal i-αppli program
when an i-αppli Stand-by display is running
From the i-αppli Stand-by display, press r.
" " or "
i-αppli program as a normal one.
" is displayed, you can
≥ To return to the i-αppli Stand-by display, press and hold r for at least one
second or press h; then select "Ended". To release the i-αppli Stand-by
display, select "Terminated", and select "YES".
Information
≥ If you turn off the FOMA phone while the i-αppli Stand-by display is running, the confirmation
display appears asking whether to start the i-αppli program when you turn on the power again.
≥ You can set only one software program for the i-αppli Stand-by display.
When the date and time are not set
During Lock All
During playback of animations/Flash movies
" appears on the desktop. Select the icon to bring up
>
)
" is displayed for the software program set as the Stand-by display.
" or " " is displayed while an i-αppli Stand-by display is running.
" changes to a blinking " " or "
)
" and then you can operate the
243