Panasonic Foma p705im Instruction Manual page 214

Function menu
Release You can select mail addresses or phone numbers, and release
(Release selected) the sort condition for them. (The items are deleted from the
Auto-sort Setting display.)
1Release selected1Put a check mark for mail addresses
or phone numbers to be released1l(
Release You can release all sort conditions. (The items are deleted
(Release all) from the Auto-sort Setting display.)
1Release all1YES
Information
<Address sort (Look-up group)>
≥ On the Auto-sort Setting display, "
≥ You cannot set groups on the UIM.
≥ The secret mail messages received in ordinary mode (not in "Secret mode" or
"Secret data only") are not sorted into the folder.
<Address sort (Look-up mail group)>
≥ On the Auto-sort Setting display, "
name.
<Subject sort>
≥ When the subject matches sort conditions for multiple folders, it is sorted to the
folder nearest to the "Inbox" folder or "Outbox" folder.
≥ Even if you set "No title", the i-mode mail titled with "No title" because of no entry
cannot be sorted.
≥ SMS messages cannot be sorted by subject.
<Sort all>
≥ You cannot sort SMS reports or SMS messages that have been directly received
on the UIM.
212
Operation/Explanation
)1YES
" is added to the top of the group name.
" is added to the top of the mail group
< Mail Group >
Creating Mail Group
You can store mail addresses by group. You can send mail to regular
destinations.
You can store up to five addresses per group, and up to 20 groups.
m1Phonebook1Phonebook
1
settings1Mail group
1Select a Mail group to be stored.
≥ When mail addresses are stored in a Mail group,
" appears at the lower left of the display. Press l(
"
compose i-mode mail to a selected Mail group set as the destination address.
Go to step 3 on page 182.
2
Highlight <Not stored> and press
l(
).
≥ If you select a stored mail address, the Mail Group
Address Confirmation display appears.
3
Enter a mail address.
≥ You can enter up to 50 half-pitch characters.
Repeat step 2 and step 3 to store multiple mail addresses.
Function Menu of the Mail Group List
Function menu
Compose message You can compose an i-mode mail message to the Mail group.
Go to step 3 on page 182.
1Enter a name of the Mail group.
Edit group name
≥ You can enter up to 10 full-pitch/20 half-pitch characters.
Reset group name You can reset the name of Mail group to the default.
1YES
m + 2 - 6 -
Mail Group List
) to
Detailed Mail Group
display
Operation/Explanation