Panasonic Foma p705im Instruction Manual page 361

m1Settings1Call time/cost1Call data
1
Last call duration
Talk: Displays the call duration of the latest voice call.
Digital Videophone: Displays the call duration of the latest videophone call.
Non-limiting digital: Displays the call duration of the latest 64K data
communication.
Last call cost
Talk: Displays the call cost for the latest voice call.
Digital Videophone: Displays the call cost for the latest videophone call.
Non-limiting digital: Displays the call cost for the latest 64K data communication.
Total calls duration
Talk: Displays the call duration of voice calls from the time Reset Total
Duration was executed to the current time.
Digital: Displays the call duration of videophone calls and 64K data
communication from the time Reset Total Duration was executed to
the current time.
Total calls
Displays the call cost from the time Reset Total Cost was executed to the
current call.
Calls reset
Displays the date and time when Reset Total Duration was executed last time.
Cost reset
Displays the date and time when Reset Total Cost was executed last time.
Information
≥ When Last Call Duration exceeds "19 hours 59 minutes 59 seconds", or Total
Calls Duration exceeds "199 hours 59 minutes 59 seconds", "0 s" returns to
re-count the time.
≥ If you switch between the voice call and videophone call during a call, the call
duration and call cost are counted respectively for the calls. You are not charged
while "Changing" (see page 53) is displayed.
≥ The duration/charge for i-mode communication and packet communication are
not counted. For how to check the i-mode fee, refer to "Mobile Phone User's
Guide [i-mode] FOMA version" which is supplied on your i-mode contract.
≥ The charge for Chaku-moji is not counted.
≥ The international call fee for using WORLD CALL is counted. The fees for using
other international call services are not counted.
≥ The duration for ringing and calling is not counted as call duration.
≥ If you turn off the power or remove the UIM, Last Call Duration is reset to "0 s";
and Last Call Cost is reset to "¥¢¢".
< Reset Total Cost&Duration
Resetting Total Duration/Total Cost
1 m1Settings1Call time/cost1Reset total cost&dura.
1Enter your Terminal Security Code
1Do the following operations.
Item
Reset total You can reset Last Call Duration and Total Calls Duration to "0 s".
1YES
duration
Reset total cost You can reset Last Call Cost and Total Calls to "¥0".
1YES1Enter the PIN2 code.
≥ See page 121 for PIN2 code.
< Notice Call Cost >
Setting Call Cost Limit
You can set the call cost limit for Total Calls and can be notified when
it is exceeded. If you set "Auto reset setting" to "ON", the call cost is
reset at midnight on the 1st of the month and "
1 m1Settings1Call time/cost1Notice call cost
1Enter your Terminal Security Code
1ON or OFF1Enter a max cost.
≥ You can set from ¥10 through ¥100,000 in unit of ¥10.
2
Select a method to alert1ON or OFF
1Enter the PIN2 code.
≥ See page 121 for PIN2 code.
When Total Calls has exceeded the max cost
" " appears. When "Icon + alarm" is set as a notice method and the Stand-by
display returns, the message to the effect that the call cost has exceeded the
maximum cost is displayed, and a warning tone sounds from the speakers.
m + 6 -
>
Operation/Explanation
" is deleted.
0 -
359