Panasonic Foma p705im Instruction Manual page 516

"Phone number" for connecting to an access point name (APN)
you register in cid
"¢99¢¢¢<cid No.>#"
(Example) When connecting to the access point name (APN) you
register in cid2, enter the following:
¢99¢¢¢2#
Resetting/Confirming the access point name (APN) settings
You can use AT commands to reset/confirm the access point name
(APN) settings.
Resetting access point name (APN)
The access point name (APN) for cid=1 returns to "mopera.ne.jp"
(default), and for cid=3 returns to "mopera.net" (default); the settings for
cid=2 and cid=4 through cid10 are reset to being unregistered if you reset
them.
(Entry method)
AT+CGDCONT= (When resetting all the cid contents)
AT+CGDCONT=<cid> (When resetting only a specific cid)
Confirming access point name (APN)
The currently specified access point name appears on the display.
(Entry method)
AT+CGDCONT?
Set Caller ID Notified/Not Notified
For packet communication, you can specify whether to
notify your caller ID (caller ID notified/not notified).
The caller ID is your important information; so, take a
great care to notify your caller ID. You can use AT
commands (¢DGPIR command) to specify "caller ID
notified/not notified" before dial-up connection.
1
Start the communication software such as
"Hyper Terminal".
≥See page 21 for details on how to operate "Hyper Terminal".
2 Use the ¢DGPIR command (see page 49) to
specify "caller ID notified/not notified".
≥To automatically add "184 (not notify)" for outgoing or incoming
call, enter the following:
AT¢DGPIR=1
≥To automatically add "186 (notify)" for outgoing or incoming call,
enter the following:
AT¢DGPIR=2
3
Confirm that "OK" appears on the display.
Information
≥When using DoCoMo Internet access service "mopera U" or "mopera",
you need to set your caller ID to be "notified".
≥If the entered AT command is not displayed, enter "ATE1
Specifying "caller ID notified/not notified" in dial-up network
Also by dial-up network setting (see page 23), you can add "186 (notify)"
or "184 (not notify)" to each access point number.
When you specify "186 (notify)" or "184 (not notify)" using both the
¢DGPIR command and dial-up network setting, the caller ID is set as
follows:
Dial-up network Caller ID notification
setting by ¢DGPIR
setting (cid = 3)
command
¢99¢¢¢3#
Not set
Not notify
Notify
184¢99¢¢¢3# Not set
Not notify
Notify
186¢99¢¢¢3# Not set
Not notify
Notify
≥To connect to "mopera U" or "mopera", you need to notify your caller ID.
Set Dial-up Network for Windows XP
1
" (Start)"1"
programs)"1"
1"
(Communications)"1Open "
(New connection wizard)".
2
When the "
connection wizard)" display appears, click "
(Next)".
3
Select "
the Internet)", then click "
4
Select "
(Manually set up the connection)", then click
" (Next)".
23
".
Notify/Not notify caller ID
Notify
Not notify
Notify
Not notify
("184" specified in the dial-up
network has a priority)
Notify
("186" specified in the dial-up
network has a priority)
(All
(Accessories)"
(New
(Connect to
(Next)".