Panasonic Foma p705im Instruction Manual page 390

Item
Set call/receive No. You can set the character font of phone numbers displayed on
(Disp. call/receive the Dialing/Call Receiving display, detailed Dialed/Received
No.) Call display, detailed Redial display, and detailed Sent
Chaku-moji Message display for when you make/receive calls
by Number B.
1Pattern 1 or Pattern 2
Set call/receive No. You can set a ring tone for Number B and a mail ring tone for
(Ringtone set. for Address B.
1Select an item.
No. B)
Phone . . . . . . . . .Sets a ring tone for voice calls.
Video-Phone . . .Sets a ring tone for videophone calls.
Mail . . . . . . . . . . .Sets a ring tone for i-mode mail messages
1Select a type of ring tone.
Go to step 3 on page 95.
≥ If you select "Release", the setting returns to the default.
2in1 function OFF You can deactivate 2in1.
1YES
Receive avoidance You can set Receive Avoidance Set. manually for number A
set. and number B.
1Change recv. avoid.1A number or B number
(Change recv.
1Select an item.
avoid.)
Unchange. . . Does not change Receive Avoidance Set.
Receive. . . . . Receives the calls to the selected phone
Avoid . . . . . . Avoids the calls to the selected phone number.
1l(
)
≥ When "Mode link" is activated, the confirmation display
appears telling that it is necessary to deactivate it.
Receive avoidance You can check Receive Avoidance Set.
1Check recv. avoidance
set.
(Check recv.
avoidance)
388
Operation/Explanation
and SMS messages.
number.
Item
Receive avoidance You can activate/deactivate Mode Link. When you activate it,
set. Receive Avoidance Set. automatically changes by linking to
(Mode link) switching of the mode of 2in1; You can receive a call only to
Number A when in A Mode, only to Number B when in B
Mode, and to both Number A and B when in Dual Mode.
1Mode link1YES
Receive avoidance You can operate Receive Avoidance Set. from overseas.
1Recv. avoid. (abroad)1YES
set.
1Operate following the voice guidance.
[Recv. avoid.
≥ When "Mode link" is activated, the confirmation display
(abroad)]
appears telling that it is necessary to deactivate it.
Information
<Stand-by display>
≥ See "Set Stand-by Display" on page 101 to set the Stand-by display in A Mode.
<Set call/receive No. (Disp. call/receive No.)>
≥ The setting is retained during Personal Data Lock.
≥ See "Change Character Font of Phone Numbers" on page 115 to set the font of
phone numbers displayed for when you make/receive calls by Number A.
<Set call/receive No. (Ringtone set. for No. B)>
≥ See "Select Ring Tone" on page 94 to set a ring tone for Number A and a mail
ring tone for Address A.
≥ If a call comes in to Number B without notifying his/her caller ID, the ring tone set
by "Call setting w/o ID" sounds.
<Receive avoidance set. (Mode link)>
≥ When "Mode link" is activated, you cannot execute "Mode switching" out of the
service area.
Operation/Explanation