Panasonic Foma p705im Instruction Manual page 508

6
Confirm the set information, then click "
(Complete)".
The set contents are listed on the display. Confirm that there is no
problem on the set contents, then click "
≥To change the set contents, click "
≥If "
(Create a dial-up shortcut on the desktop)" is checked, a dial-up
shortcut will be created on the desktop.
7
Click "OK".
The setting is completed.
Open the dial-up shortcut icon automatically created
on the desktop; then the connection display for
starting communications appears. After confirming that the
connection starts, you can start the Internet browser or mail browser
for communication. (See page 16)
Using a provider other than "mopera U" or
"mopera" as an access point
The 64K data communication is a communication
system you are charged according to the duration of
connection. (Maximum communication speed: 64 kbps)
To use a provider other than "mopera", you may need to
separately apply for the service and sign a contract with
the provider.
1
Click "
2
Select "64K
communication)", then click "
Confirm that "64K
checked, then click " (Next)".
3
Select " (Others)", then click "
(Next)".
Confirm that " (Others)" is checked, then click "
(Complete)".
(Back)".
(Easy Setting)".
(64K data
(Next)".
(64K data communication)" is
(Next)".
4
Enter dial-up information.
When connecting to a provider supporting ISDN-synchronous 64K
other than "mopera U" or "mopera", register the following items when
creating the dial-up.
" (Access point name)" (arbitrary)
" (Select a modem)" (FOMA P705i
" (Phone number of provider access)"
Set whether to notify your caller ID for dial-up connection.
Correctly enter these items according to the provider information.
≥For the setting of the caller ID notification, follow the instructions
from the provider you use.
≥You cannot enter the following half-pitch characters in the "
(Access point name)" field: ¥, /, :, ¢, ?, !, <, >, |, and ".
5
Click "
information)".
The display for specifying "IP
(name server)" appears. When entering dial-up information for the
provider you have subscribed or Intranet LAN system, specify
addresses according to the entry instruction information, then click "OK".
6
Click " (Next)".
7
Specify "
(Password)", then click "
When specifying the user name and password, correctly enter the
information supplied from your Internet service provider, taking care
of uppercase and lowercase letters and so on.
≥Select a user optionally.
15
or PROSOLID
(Set detailed
(IP address)" and "
(User name)" and "
(Next)".
)