Troubleshooting - Panasonic Foma p705im Instruction Manual

Troubleshooting

≥First of all, check to see if you need to update the software program
and then update it if required. See page 454 for how to update
software programs.
Problem
≥ Make sure the battery is attached to the FOMA
The FOMA phone
does not turn on. phone correctly.
≥ Make sure the battery is fully charged.
(Cannot use)
≥ If the mova is usable in Dual Network Service,
the FOMA phone service is not available. Is the
FOMA phone usable? For details, refer to "Mobile
Phone User's Guide [Network Services]".
≥ Make sure Keypad Dial Lock is deactivated.
Cannot dial by
≥ Make sure Restrict Dialing is deactivated.
pressing numeric
≥ Make sure Lock All is deactivated.
keys.
≥ Make sure Self Mode is deactivated.
≥ Make sure the phone number contains a city
Dial but cannot
connect; a busy code.
≥ Enter the phone number after you hear the dial
tone sounds.
tone.
≥ If "
" appears, move to a place where it
disappears.
≥ You may be out of the service area or weak
" " appears and
radio waves are being received.
a busy tone sounds.
≥ This may be because Lock All is activated.
" " and "Lock all"
are displayed and
pressing keys are
null.
≥ This may be because "Side keys guard" is set
Pressing the side
keys does not work to "ON".
when the FOMA
phone is closed.
≥ The battery runs short. You need to charge.
Alert beeps.
442
Check point Reference
40
41
383
126
128
122
124
50
44
44
122
126
41
Problem
≥ Make sure the battery is attached to the FOMA
Cannot charge.
(The Call/Charging phone correctly.
≥ Make sure the power plug of the adapter is
indicator of the
FOMA phone does securely inserted into outlet.
≥ Make sure the adapter and the FOMA phone is
not light, or it
flickers.) firmly connected. For AC adapter (option),
make sure its connector is firmly connected to
the FOMA phone or a desktop holder (option).
≥ Make sure Power Saver Mode is deactivated.
The display grows
dark, showing
nothing.
≥ This may be the mail from a party whose mail
Different ring tones
sound for incoming ring tone is set by the setting items in the
mail. Phonebook.
≥ This may be the mail from a party stored in a
group set with a mail ring tone by Group Setting.
≥ This may be the call or mail message from a
When a call or mail
message comes in, party for whom you have set "Illumination/Mail
the Call/Charging illumination" by setting items in the Phonebook.
≥ This may be the call or mail message from a
indicator lights/
flickers differently. party stored in a group set with "Illumination/
Mail illumination" by Group Setting.
≥ Make sure the UIM that was inserted when you
Images or melodies
selected in the obtained images or melodies is inserted.
functions are not
played back; they
are played back at
the default setting.
≥ Make sure that total calls cost accumulated on
Cannot count total
calls cost. the UIM does not exceed the limit (about
¥16,770,000). Perform Reset Total Cost to
return to ¥0.
≥ Make sure that you do not use a USB hub. If
Cannot perform
data transfer you use a USB hub, the devices may not work
correctly.
Check point Reference
40
42
104
83
85
83
85
38
359
–