Table of Contents
Advertisement
Information
≥ The ToruCa file (details) that contains data whose output from the FOMA phone is
prohibited is sent as a ToruCa file before obtaining the detailed information.
≥ You cannot receive Phonebook entries while Restrict Dialing is activated. At
sending, you can send only the Phonebook entries set with Restrict Dialing and
data of Own Number.
≥ It may take long to forward data or you might not be able to receive data
depending on the data size.
≥ You cannot store a still image in excess of 2 Mbytes, moving image in excess of
10 Mbytes, melody in excess of 100 Kbytes, PDF file in excess of 2 Mbytes,
ToruCa file in excess of 1 Kbyte, or ToruCa file (details) in excess of 100 Kbytes.
≥ If the FOMA USB Cable with Charge Function 01 (option) is connected to the
FOMA phone, you may not be able to perform infrared data exchange.
≥ You cannot send files that are not supported by the device at the receiving end.
Sending/Receiving One or Multiple Data
Files
You can send/receive the data files one by one using infrared rays.
You can send/receive multiple still images, moving images, and
ToruCa files at a time.
Notes on sending/receiving
≥ In Secret Mode, you can send secret data as well. However, in Secret Data Only,
you can send only the secret data.
≥ If you receive a Phonebook entry stored as secret data in "Secret mode" or "Secret
data only", the Phonebook entry is stored as an ordinary one.
≥ When sending a Phonebook entry, you cannot send the stored secret code and
voice dial entry.
Send One or Multiple Data Files
1
Display for a data item to be sent1i(
1Send Ir data
≥ To send a Phonebook entry, select "Send Ir data" from the Function menu
and select "Send phonebook".
≥ To send a mail message, ToruCa file or bookmark, select "Ir/
transmission" from the Function menu and select "Send Ir data".
≥ To send multiple files, select the files you want to send by "Multiple-choice".
Press i(
) to select "Send Ir data".
2
YES
≥ To send multiple files, select "YES" by a factor of selected number of files,
and send them.
Receive One or Multiple Data Files
m1LifeKit1Receive Ir data
1
≥ You can paste the Ir data receiving function to the desktop. (See page 114)
2
Receive1YES
≥ The confirmation display appears asking whether to continue receiving after
receiving one data file.
When you received multiple files, select "YES".
Information
≥ When you receive an instruction for starting a software program, and you have
already downloaded a compatible software program, that software program
starts. If you have not put a check mark for "Ir iαppli To" of "Set iαppli To", the
software program does not start up automatically.
Sending/Receiving All Data Files
You can send/receive the following data files all at once using infrared
rays: the Phonebook entries, schedule events, ToDo items, text
memos, bookmarks, mail messages, and ToruCa files.
To send all data files, enter a session number (any four-digit number).
The receiving end needs to enter the same session number.
Notes on sending/receiving all data files
≥ Receiving all data files deletes all data you have stored including the secret data
and protected data, and the received data overwrites the existing data. The data
you have stored in "Secret mode" is deleted as well. Check that no important data
)
is stored before receiving all data files.
≥ If you send all Phonebook entries, the "Own number" data is also sent. All the data
of "Own number" at the receiving end is overwritten except the own number. Mail
address is also overwritten by sender's address, so change it at the receiving end.
≥ Even if you send all Phonebook entries, information of voice dial entries are not
sent.
m
+
7
-
9
-
309
Advertisement
Chapters
Table of Contents
