Setting Response To Incoming Calls Without Caller Id - Panasonic Foma p705im Instruction Manual

Information
≥ You cannot operate the following while "Restrict dialing" is set:
Calling up/Referring to phone numbers other than specified
Keypad dial (except for the calls to the specified phone numbers)
Dialing from Received Calls (except for the calls from the specified phone
numbers)
Storing/Editing/Deleting Phonebook entries, copying Phonebook entries from
the microSD memory card, and copying Phonebook entries to the UIM
≥ You can make emergency calls at 110/119/118 even if you set "Restrict dialing".
≥ When a call comes in from the phone number set with "Call rejection" or from the
phone number other than the ones set with "Call acceptance", the call is stored in
"Received calls" as a missed call record and the "Missed call" icon appears on the
Stand-by display. Also, the caller hears a busy tone even if you have set Voice
Mail Service or Call Forwarding Service to "Activate". However, if you set the ring
time for Voice Mail Service or Call Forwarding Service to 0 seconds, when the
FOMA phone is out of the service area, or when the power is turned off, the caller
does not hear the busy tone and Voice Mail Service or Call Forwarding Service
works.
≥ You can receive SMS messages or i-mode mail messages regardless of the
setting of "Call rejection" or "Call acceptance".
Check/Release Restrictions on Phonebook Entries
1 m1Phonebook1Restrictions
1Enter your Terminal Security Code1Select an item.
≥ The set item is indicated by " ".
≥ To release all the Phonebook entries set with Restrictions, press
i(
), select "Release", and then select "YES".
2
Select a Phonebook entry.
The phone number set with Restrictions is displayed.
≥ To release "Restrictions" per phone number, select the phone number you
want to release by following the same steps above, and select "YES".
< Call Setting without ID >
Setting Response to Incoming Calls
without Caller ID
You can set whether to receive (accept) or not to receive (reject) a
voice call and videophone call depending on the reason for no caller
ID. There are three reasons; "Unavailable", "PublicPhone", and "User
unset".
1 m1Settings1Lock/Security1Call setting w/o ID
1Enter your Terminal Security Code
1Select an item.
Unavailable . . . . Calls from the other party who cannot notify his/her phone
number such as calls from overseas or from landline phones
via call forwarding services.
(However, the caller ID might be notified depending on the
telephone companies the calls go through.)
PublicPhone . . . Calls from public phones, etc.
User unset . . . . When the caller has set the caller ID not to be notified.
2
Accept or Reject
≥ If you select "Accept", go to step 2 on page 95 to select a ring tone.
If you select "Same as ring tone", the ring tone will be the one selected in
"Phone" of "Select ring tone".
Information
≥ If you set to "Reject", the ring tone does not sound even when a call comes in.
The call is stored in "Received calls" as a missed call record and the "Missed call"
icon appears on the Stand-by display. Also, the caller hears a busy tone even if
you have set Voice Mail Service or Call Forwarding Service to "Activate".
However, if you set the ring time for Voice Mail Service or Call Forwarding Service
to 0 seconds, when the FOMA phone is out of the service area, or when the
power is turned off, the caller does not hear the busy tone and Voice Mail Service
or Call Forwarding Service works.
≥ You can receive SMS messages or i-mode mail messages regardless of this
setting.
m + 1 - 0 -
129