Panasonic Foma p705im Instruction Manual page 98

< Vibrator >
Informing You of an Incoming Call by
Vibration
You can set the vibrator to notify you of incoming calls and mail.
m1Settings1Incoming call1Vibrator
1
1Select an incoming type1Select a vibration pattern.
Pattern 1 . . . . . . . . . Alternates between vibration on (about 0.5 second) and
off (about 0.5 second).
Pattern 2 . . . . . . . . . Alternates between vibration on (about 1 second) and off
(about 1 second).
Pattern 3 . . . . . . . . . Alternates between vibration on (about 3 seconds) and
off (about 1 second).
Melody linkage. . . . Vibrates in time with the vibration pattern stored in the
melody.
OFF . . . . . . . . . . . . . Does not vibrate.
≥ While you are selecting a pattern, the FOMA phone vibrates by the selected
pattern for confirmation. However, it does not vibrate if you select "Melody
linkage".
≥ The following icons are displayed on the Stand-by display while the vibrator is
set:
: Vibrates for incoming voice calls or videophone calls.
: Vibrates for incoming mail, chat mail or Messages R/F.
: Vibrates for incoming voice calls or videophone calls, and vibrates for
incoming mail, chat mail or Messages R/F.
Information
≥ The priority order of vibrators is as follows: "Setting for Phonebook entry"
"Group setting" "Vibrator".
≥ The vibrator vibrates at a regular strength, regardless of the ring volume level.
≥ Even when "Melody linkage" is set, the FOMA phone vibrates with "Pattern 2" if an
i-motion movie or melody with no vibration pattern is set for the ring tone.
≥ Be careful not to leave the FOMA phone on a desk or similar places with the
vibrator activated; when a call comes in, the FOMA phone might move and fall by
vibration.
96
+ m 5 - 4 -
< Voice Announce
Using Recorded Sound as Ring Tone
You can set the sound you recorded with the FOMA phone for a ring
tone (including a ring tone for Number B of 2in1), On hold tone/
Holding tone, alarm for "Alarm", "Schedule", and "ToDo", and an
answer message for Record Message.
You can record only one item for about 15 seconds.
m1LifeKit1Rec.msg/voice memo1Voice announce
1
1Record
≥ To suspend recording midway, press
contents recorded to that point are saved.
≥ The tone beeps about 5 seconds before the recording time (for about 15
seconds) ends. When recording ends, the tone beeps twice, and the former
display returns.
≥ The recording is suspended when a call comes in, when an alarm for "Alarm",
"Schedule", or "ToDo" sounds, or when you switch displays using Multitask
during recording. (The contents recorded to that point are saved.)
≥ To play back the recorded sound, select "Play". To suspend playback
midway, press
≥ To erase the recorded sound, select "Erase", then select "YES".
<
Melody Call Setting
Changing Calling Tone
Melody Call is the service that changes the calling tone phone callers
hear, to a melody you like.
For details, refer to "Mobile Phone User's Guide [Network Services]".
≥ Melody Call is a pay service which is available on a subscription basis.
m1Settings1Melody Call Setting1YES
1
1Follow the instruction on the display.
Information
≥ Melody Call is not available for incoming videophone calls.
>
o ( O ), h, or r. The
o ( O ), h, or r.
>
m + 5 - 5 -