Using Firstpass Pc Software; Connecting And Disconnecting - Panasonic Foma p705im Instruction Manual

Disconnecting
1
Click the dial-up icon on
the task tray.
2
Click " (Disconnect)".
Information
≥The communication line may not be disconnected by only exiting the
browser software. To surely disconnect the communication line,
perform this operation.
≥The baud rate displayed on your personal computer may be different
from the actual one.
When you cannot connect to network
If you cannot connect to network (if you fail a dial-up
connection), confirm the following items:
If this error occurs
Your personal Confirm whether your personal computer satisfies
computer cannot the operating environment (see page 2).
recognize "FOMA Confirm whether "FOMA communication setup
files" (driver) is installed in your personal computer.
P705i " or
Confirm whether the FOMA phone is connected to
"PROSOLID "
your personal computer and powered on.
Confirm whether the FOMA USB Cable with
Charge Function 01 (option) is securely connected.
You cannot connect Confirm whether the ID (user name) and password
to the access point are correct.
When you need to notify your caller ID such as
when using "mopera U" or "mopera", make sure
"184" is not prefixed to the phone number.
Confirm that "
control)" is checked in the modem properties.
If you cannot connect to the access point even
after confirming above, contact your Internet
service provider or network administrator for the
setting method, and so on.
Confirm those:
(Use the flow
Set 64K Data Communication
The operation below explains how to set the 64K data
communication without using "FOMA PC setup
software".
Setting dial-up connection and TCP/IP
The setting of dial-up connection and TCP/IP for the 64K
data communication is the same as for the packet
communication (see page 20).
Take care of the following points:
≥In the 64K data communication, you do not need to set an access
point name (APN). For the access point of the dial-up connection,
enter the phone number of the access point specified by your
Internet service provider or network administrator. (To connect to
"mopera U", enter "¢8701" in the phone number field. To connect to
"mopera", enter "¢9601" in the phone number field.)
≥Set "caller ID notified/not notified" and "others" as required.
(When connecting to "mopera U" or "mopera", you need to notify
your caller ID.)
≥Contact your Internet service provider or network administrator for
details on the setting contents.

Connecting and Disconnecting

You can operate in the same way as for the packet
communication. Perform the operations on page 16 or
page 28.

Using FirstPass PC Software

The FirstPass PC software is to access the FirstPass
site from the web browser of your personal computer
using the user certificate obtained by the FOMA phone
supporting FirstPass.
Notes for Installing FirstPass PC
Software
Confirm the operating environment
Use the FirstPass PC software under the following
operating environment:
Item
PC main unit PC/AT compatible model
OS Windows 2000, Windows XP (Japanese version in each)
Memory
Windows 2000: 32 Mbytes or more
requirements
Windows XP: 128 Mbytes or more
Hard disk space size Unused memory space of 10 Mbytes or more
Browser Microsoft
Microsoft
using Windows XP
The memory requirements and hard disk space size may vary depending
on the system environment.
Before installing
See "FirstPassManual" (PDF format) in the
"FirstPassPCSoft" folder of the CD-ROM before
installing the FirstPass PC software.
29
Required environment
®
Internet Explorer 5.5 or higher
®
Internet Explorer 6.0 or higher when