Setting Chaku-Moji - Panasonic Foma p705im Instruction Manual

< Chaku-moji >

Setting Chaku-moji

When making a voice call or videophone call, you can send your text
message to tell the subject during calling.
≥ For details on Chaku-moji or compatible models, refer to DoCoMo web page or
"Mobile Phone User's Guide [Network Services]".
≥ The sending end is charged, but the receiving end is not charged.
When a Chaku-moji message is received
A Chaku-moji message is displayed below a caller. The
Chaku-moji message is stored in Received Calls as well.
≥ The Chaku-moji message is displayed only during ringing.
It is not displayed during a call.
≥ Even when a Chaku-moji message comes in within the
ring start time set by "Ring time", it is received and
recorded in Received Calls.
≥ The Chaku-moji message is displayed on the Private window when "Chaku-moji" of
"Called" on page 104 is set to "ON".
≥ The Chaku-moji message is not displayed during Lock All, Omakase Lock, or
Personal Data Lock. However, you can check the Chaku-moji message from
Received Calls after the lock is released.
Store Chaku-moji Messages
You can store up to 10 Chaku-moji messages in the Message List.
m1Service1Chaku-moji1Create message
1
1Highlight <Not stored> and press l(
1Enter a message.
≥ To edit a stored message, highlight it and press l(
≥ You can enter up to 10 characters regardless of whether they are
pictographs, symbols, or full-pitch/half-pitch characters.
Make a Call with a Chaku-moji Message
1
Enter a phone number
or
bring up the detailed display of a Phonebook entry,
redial item, dialed call record, or received call record.
i(
2
1Do the following operations.
Function menu
Create message
Select message
Sent messages
3 Press d or
≥ Press l(
≥ The Chaku-moji message being sent is displayed during dialing.
Information
≥ When a Chaku-moji message has arrived at the other party's phone,
"Transmission completed" is displayed, and you are charged a transmission fee.
)
≥ When a Chaku-moji message does not arrive at the other party's phone such as
when the other party's phone is not a Chaku-moji compatible mobile phone or the
call is not allowed by "Message disp. settings" at the receiving end, "Transmission
).
failed" is displayed. In this case, you are not charged a transmission fee.
≥ Depending on the radio wave conditions, the transmission result may not be
displayed at the sending end even if a Chaku-moji message has arrived at the
other party's phone. In this case, you are charged a transmission fee.
≥ Even if you make a call sending a Chaku-moji message, the Chaku-moji message
is not displayed and you are not charged a transmission fee (the call is not
recorded in Received Calls at the receiving end) when the other party's phone is
out of the service area, turned off, during Public Mode (Drive Mode), or the ring
time for Record Message Setting is set to zero seconds. Also, the transmission
result is not displayed at the sending end.
)1Chaku-moji
Operation/Explanation
You can create a Chaku-moji message just before dialing.
1Enter a message.
≥ You can enter up to 10 characters regardless of whether they
are pictographs, symbols, or full-pitch/half-pitch characters.
≥ The Chaku-moji message created using this function is not
stored in the Message List.
From the Message List, you can select the stored Chaku-moji
message.
1Select a message.
From the Sent Message List, you can select a Chaku-moji
message to be sent. Up to 10 sent Chaku-moji messages only
are stored in the Sent Message List. If you send the same
Chaku-moji message, the older one is deleted. When the
number of sent Chaku-moji messages exceeds 10, the
messages are deleted from the oldest one.
1Select a sent message.
o ( O
).
) to make a videophone call.
57