Panasonic Foma p705im Instruction Manual page 520

14
Enter the user name and password supplied
from your Internet service provider or network
administrator, in the "
and " (Password)" fields. Then
click " (Next)".
≥When connecting to "mopera U" or "mopera", you can leave the
user name and password fields blank. In this case, two displays
"
make the user name blank?)" and "
(Do you want to make the password blank?)"
appear. Click " (Yes)" on each display. Then go to step 15.
15
Enter any name in the "
name)" field, then click "
≥Here, "SAMPLE" is entered as an example.
16
Select " (No)", then click "
≥When setting the Internet mail, select "
≥Contact your Internet service provider or network
administrator for details on the setting.
17
Then, carry out the "TCP/IP" setting.
≥If the display below appears, uncheck "
connect to the Internet right now, select here, then click
"Complete")". Then click "
(User name)"
(Do you want to
(Connection
(Next)".
(Next)".
(Yes)".
(To
(Complete)".
18
" (Start)"1"
1"
(Communications)"1
connections)".
19
Select the icon of the access point name you
entered in step 15; then "
menu1Select "
20
Click the "
setting contents.
≥When two or more modems are connected to your personal
computer, confirm that "
(Modem) - PROSOLID
(Connection method)" field. If it is not checked, check it.
≥Confirm that "
unchecked. If it is checked, uncheck it.
≥The COM port number allocated to "FOMA P705i " or
"PROSOLID " varies depending on the personal computer you
use.
≥When connecting to "mopera U", enter "¢99¢¢¢3#" as the
access point number.
See page 22 for access point numbers other than "mopera U".
27
(Programs)"
(Accessories)"1"
Open "
(Network and dial-up
(File)"
(Properties)".
(General)" tab to confirm the
(Modem) - FOMA P705i " or "
" is checked in the "
(Use dial information)" is