Operating Ssl Certificates - Panasonic Foma p705im Instruction Manual

2
Enter your PIN2 code.
≥ Enter your PIN2 code within 60 seconds. When the
code is not entered within 60 seconds, the
connection is cut off as an error entry.
≥ See page 121 for PIN2 code.
3
Download1Continue
≥ If you do not download the user certificate immediately, select "Menu". From
the confirmation display asking whether to close the SSL page, select "YES"
to return to the site display for the FirstPass Center.
Information
≥ Before downloading a new or an updated certificate, be sure to request the user
certificate to be issued. User certificates cannot be downloaded until the request
for issue has been made.
Access Sites with User Certificate
You can connect to FirstPass sites with your user certificate.
1
Bring up a FirstPass site1Select an item1YES
2
Enter your PIN2 code.
≥ Enter your PIN2 code within 60 seconds. When the code is not entered within
60 seconds, the connection is cut off as an error entry.
≥ See page 121 for PIN2 code.
Information
≥ If you try to connect to the FirstPass site without the user certificate or when its
available period is expired, the confirmation display appears asking whether to
continue connecting to the site. Select "NO" to return to the previous page.
Download or update the user certificate from the FirstPass Center site and then
access the site again.
≥ The packet communication fee for accessing the FirstPass site is included in
Pake-Houdai or Pake-Houdai Full.
Request Revocation of User Certificate
You can revoke the downloaded user certificate.
1
Site display of the FirstPass Center1Other settings
1Revoke your certificate1YES
1Enter your PIN2 code.
≥ Enter your PIN2 code within 60 seconds. When the code is not entered within
60 seconds, the connection is cut off as an error entry.
≥ See page 121 for PIN2 code.
2
Continue1Continue1Continue
Information
≥ To use FirstPass after revoking a certificate, you need to apply again for your user
certificate to be issued and then download it.
≥ See page 173 for how to view the download user certificate.
< >
Certificate Host
Changing a CA Center
Normally, you do not need to change this setting.
You can set the host for downloading the user certificate.
1 i1Operate certificate1Certificate host
1Highlight <Not recorded> and press l(
≥ If you select a stored host, the setting is changed to that host.
≥ To delete the stored host, press i(
Terminal Security Code, and then select "YES".
).
), select "Delete", enter your
175