Preparation Flow For Data Communication; At Command - Panasonic Foma p705im Instruction Manual

Preparation Flow for Data Communication

The following outline shows a preparation flow to use the packet
communication by connecting the FOMA phone to a personal computer.
Connect a personal computer to the FOMA phone using the FOMA USB Cable
with Charge Function 01 (option).
Download or install the FOMA communication setup files.
Install the FOMA communication setup files from the provided CD-ROM.
Download the FOMA communication setup files from the DoCoMo web page
and install.
Check the setting after installation.
Set the access point by using the
FOMA PC setup software.
or
Set the access point and
dial-up network without using the
FOMA PC setup software.
Connect.
When installing "FOMA communication setup files" (driver)
Use the provided "FOMA P705i /PROSOLID
install "FOMA PC setup software" for establishing the APN or dial-up setting easily
when you communicate.
Install FOMA Communication Setup Files (Driver)
Installing the FOMA communication setup files (driver) is required
when you connect the FOMA phone to your personal computer via the
FOMA USB Cable with Charge Function 01 (option) for the first time.
FOMA PC Setup Software
To connect the FOMA phone to a personal computer and perform the
packet communication or 64K data communication, you need to
configure various settings for the communication. By using the
"FOMA PC setup software", you can easily carry out the settings. If
required, you can set the packet communication and 64K data
communication without using the "FOMA PC setup software".

AT Command

AT commands are used to specify and modify the functions of the
FOMA phone on the personal computer.
CD-ROM". You are advised to
399