Brake Fluid Level Inspection - Yamaha TDM850 1996 Service Manual

Table of Contents

Advertisement

A
B

BRAKE FLUID LEVEL INSPECTION

3-35
BRAKE FLUID LEVEL INSPECTION
NOTE:
Position the motorcycle straight up when inspect-
ing the fluid level.
1. Place the motorcycle on a level surface.
NOTE:
Place the motorcycle on its centerstand if a cen-
terstand is equipped. If not, place a suitable stand
under the motorcycle.
2. Inspect:
S Fluid level
Fluid level is under "LOWER" level line a !
Fill to proper level.
A
Front
Recommended fluid:
DOT 4
NOTE:
When inspecting the fluid level in the reservoir on
the handlebar, make sure the master cylinder top
is horizontal.
CAUTION:
Brake fluid may corrode painted surfaces or
plastic parts. Always clean up spilled fluid im-
mediately.
WARNING
S Use only the designated quality fluid. Other-
wise, the rubber seals may deteriorate caus-
ing leakage and poor brake performance.
S Refill with the same type of fluid. Mixing
fluids may result in a harmful chemical reac-
tion leading to poor brake performance.
S Be careful that water does no enter the mas-
ter cylinder when refilling. Water will signifi-
cantly lower the boiling point of the fluid and
could cause vapor lock.
INSP
ADJ
B
Rear

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tdm 850 19964tx-ae1

Table of Contents