Special Tools - Yamaha TDM850 1996 Service Manual

SPECIAL TOOLS

The proper special tools are necessary for complete and accurate tune-up and assembly.
Using the correct special tool will help prevent damage caused by the use of improper tools or improvised
techniques. The shape and part number used for the special tool differ by country, so two types are pro-
vided. Refer to the list provided to avoid errors when placing an order.
Tool No.
90890-01083 Slide hammer bolt
90890-01084 Weight
These tools are used to remove the
main axle assembly cover.
90890-01304 Piston pin puller
This tool is used to remove the piston
pin.
90890-01312 Fuel level gauge
This gauge is used to measure the fuel
level in the float chamber.
90890-01325 Radiator cap tester
90890-01352 Adapter
This tester is needed for checking the
cooling system.
90890-01362 Flywheel puller
90890-01382 Crankshaft protector
These tools are used to remove the A.C.
magneto.
90890-01367 Fork seal driver weight
90890-01374 Adapter
These tools are used when installing the
fork seal.
90890-01326 T-handle
90890-01465 Damper rod holder
These tools are used to loosen and
tighten the front fork damper rod
holding bolt.
90890-01403 Ring nut wrench
This tool is used to loosen and tighten
the steering ring nut.
Tool name/How to use
1-6
SPECIAL TOOLS
GEN
INFO
Illustration