/ --
BRAKE FLUID LEVEL INSPECTION
3.
Eliminate:
*Dust
4. Inspect:
5. Install:
BRAKE FLUID LEVEL INSPECTION
Brake Inspection
1. Inspect:
Lower
NOTE:
Be sure that:
vent painted surfaces or plastic parts from
rod i na.
e
Use only the designated quality brake fluid,
otherwise poor brake performance will result.
*Water does not enter the master cylinder when
refilling, otherwise poor brake performance.
Use the compressed air.
Blow out dust in the element from the
outer surface.
Damage
Replace.
filter case cover
cover
fluid level (brake master cylinder)
Level low
Replenish fluid.
fluid is cleaned up immediately to pre-
2-20