Installation - Yamaha TDM850 1996 Service Manual

A.C. MAGNETO AND STARTER WHEEL GEAR
2. Inspect:
S Starter wheel gear 1
(contacting surfaces)
Pitting/Wear/Damage ! Replace.

INSTALLATION

1. Install:
S Starter wheel gear 1
S Woodruff key 2
2. Install:
S Plate washer
S Rotor 1
S Washer
NOTE:
S Clean the tapered portions of the crankshaft and
rotor.
S When installing the magneto, make sure the
woodruff key is properly seated in the key way of
the crankshaft.
3. Install:
S Bolt (rotor) 1
NOTE:
S Tighten the bolt (rotor) 1 while holding the mag-
neto with the sheave holder 2 .
S Do not allow the sheave holder 2 to touch the
projection on the rotor.
Sheave holder:
90890-01701
4-40
ENG
130 Nm (13.0mSkg)