Yamaha TDM850 1996 Service Manual page 174

OIL PAN
INSTALLATION
1. Install:
S Front balancer weight 1
S Front balancer shaft 2
S O-ring 3
New
S Plate (balancer shaft)
Installation steps:
S Turn the crankshaft until the keyway a is
aligned with the embossed mark b on the
crankcase.
S While holding the crankshaft, install the ba-
lancer weight and align the mark c on the front
balancer gear with the embossed mark d on
the crankcase.
S Install the front balancer shaft.
2. Install:
S Dowel pins
S Front balancer holder 1
3. Install:
S Rear balancer weight 1
S Rear balancer shaft 2
S O-ring 3
New
S Plate (balancer shaft)
4-50
ENG
12 Nm (1.2 mSkg)
10 Nm (1.0 mSkg)
12 Nm (1.2 mSkg)