Table of Contents
Advertisement
4. Neutral indicator light does not come on.
1. Neutral switch
Refer to "SWITCH INSPECTION".
2. Voltage
S Connect the pocket tester (DC 20 V) to the
bulb socket coupler.
Tester (+) lead ! Brown terminal
Tester (–) lead ! Sky blue terminal
S Turn the main switch to "ON".
S Check for voltage (12 V).
This circuit is good.
CONTINUITY
1
2
MEETS
SPECIFICATION
SIGNAL SYSTEM
NO CONTINUITY
Replace neutral switch.
OUT OF SPECIFICATION
Wiring circuit from main switch to bulb socket
connector is faulty, repair.
8-38
ELEC
Advertisement
Chapters
Table of Contents
Troubleshooting
