Yamaha TDM850 1996 Service Manual page 175

OIL PAN
Installing steps:
S Turn the crankshaft until the keyway a is
aligned with embossed mark b on the crank-
case.
S While holding the crankshaft, install the balancer
weight and align the mark c on the rear balanc-
er gear with the embossed mark d on the crank-
case.
S Install the rear balancer shaft.
4. Install:
S Dowel pins
S Rear balancer holder 1
4-51
ENG
10 Nm (1.0 mSkg)